EVC Silencer Adaptor – AGT Vixen

Silencer adaptor for the AGT Vixen air rifle

Converts shroud end to a standard 1/2 x 20 UNF  fitting (standard airgun moderator).

Please follow this guide, to ensure correct installation.

1. Unscrew and remove the shroud end cap and aluminium baffle from your rifle

2. Make 4x 3mm hole with a 3mm drill bit in your baffle same locations as original holes.

3. Carefully line up the 1/2 x 20 UNF adaptor hole with your baffle, place the screws and tighten up with the supplied locking nuts.

4. Reinsert the baffle and tighten.

This adaptor allows you to connect any standard 1/2 x 20 UNF moderator to your rifle shroud.

This item comes with self tightening tools (no other tools required).

Fits 177, 22, 25 and 30 caliber.

For our UK customers we can also supply silencers direct to you. For our range please click here

 

£39.59

Out of stock

SKU: SILAD-UGK-51 Category: