Daystate & Brocock Valve & Regulator Removal Tool

Main valve removal tool and regulator removal tool for the following air rifles:

–  BRK / Brocock Ghost
–  Daystate Delta Wolf
–  Daystate Alpha Wolf
–  Daystate Blackwolf (regulator only, not valve)

Precision made in the UK by Sub12 Airgunners.

Regulator removal tool:
The end labeled REG can be used to unscrew the regulator from the main block (Only after the rifle has been degassed), either by using a 19mm spanner across the flats, or by using the included tommy bar. The tommy bar is held in the tool when not in use by the 2 M6 grub screws in the sides of the tool.
 
Valve removal tool:

The end labeled VALVE can be used to unscrew the valve covering cap (Only after the rifle has been degassed). This can be done either by using a 19mm spanner across the flats, or by using the included tommy bar. The tommy bar is held in the tool when not in use by the 2 M6 grub screws in the sides of the tool.

The end labeled VALVE can also be used as a valve puller. First the valve cap needs to be removed, then the threaded holes in the side of the tool can be aligned with the flats on the valve stem. Once that’s aligned the 2 M6 grub screws can be removed from the body of the tool and installed into the threaded holes, tightening both onto the flats of the valve. With that done the tommy bar can be removed from the back of the tool and installed though the hole in the back of the tool body. Then the valve can be gently pulled from the back of the main block.

 

Degassing tool:
Finally on the BRK ghost and Daystate Deltawolf / Alphawolf, the tool can be used as a degassing tool. To use this feature simply remove the 2 grub screws from the body of the tool then tip the tommy bar out. With that done, align the threaded holes in the side of the tool with the flats on the valve stem and install the 2 M6 grub screws, tightening them onto the flats. Finally insert a 5mm allen key through the back of the tool and slowly tighten the grub screw onto the valve, after a couple of turns air should start to leak from the end of the barrel. 

 

 

£50.60

In stock

SKU: 6G-BRK VALVE TOOL Categories: , , ,

Related products

Powered by WordPress. Designed by Woo Themes