Weihrauch HW100 & HW101 air rifle cylinder removal tool set

Fits all versions of the HW100/HW101 including BP/Bullpup.

Clever design means this tool can be used to remove both sides of your HW100 cylinder.
Improved design means the bar is used through the tool rather than through the fill port which puts much less stress onto your cylinder and reduces chance of damage.

1. Make sure cylinder is completely empty before use.
2. Remove any tamper stickers across the end plugs.
3. Place cylinder into something to secure it (many use a vice) with soft jaws or something to protect it. Do not clamp too close to the end or it can tighten on the threads.
4. Place tool securely over the end you want to remove
5. Place bar through the tool so that half sticks out either side and with a hand on either side unscrew with even pressure. Do not force just from one side.
6. Push the plug over whichever side you wish to remove