Description

Installation guide (follow carefully)

1. Unscrew and remove the aluminium baffle from the shroud.
2. Using a 3 mm drill bit, drill four 3 mm holes in the baffle at the same positions as the original holes.
3. Align the adaptor with the drilled baffle, insert the supplied screws and secure them using the supplied locking nuts.
4. Re-insert the baffle into the shroud and tighten.

Important: Drill only in the same locations as the original holes and proceed carefully to avoid damage to the baffle.

What’s included

• 1 × 1/2”-20 UNF adaptor
• Fixing screws and locking nuts
• Self-tightening installation tools (no other tools required)

Technical specifications

• Material: Aluminium 6061, anodised black
• Male thread: 1/2”-20 UNF (male)
• Outer diameter: 51 mm
• Weight: 40 g

Notes & safety

• This adaptor is designed specifically for the original VIXEN first model. It will not fit other models unless explicitly stated.
• The aluminium baffle pictured is for illustration of installation only and is not supplied.
• If you are not comfortable performing the drilling or installation, have the work carried out by a competent gunsmith.