FX Impact Tensioner Fitting Kit for 800mm barrel length

PLEASE NOTE – THIS IS NOW SUPPLIED WITH THE M4 STYLE FRONT MOUNT (not the clamp type as shown in the photo)

OTHER BARREL LENGTHS AVAILABLE HERE

This FX Impact Tensioner kit with replaces the original shroud of your M3 and provides reinforcement of the barrel, which is necessary when heavy slugs are being shot with increased power, when reaching for longer distances. This reinforcement prevents barrel oscillation during a shot, which provides more accuracy and consistent results. Compatible with the FX Impact MKI, MKII and M3

The Tensioner kit can be used on STX barrels and comes is available with or without a Front Support, for Impacts that have not yet been fitted with one.

Your moderator can be put right back on the ½ UNF muzzle thread again after installation.
Please note, this model is not suitable for the 9 mm / .35 barrelkit with M18x1 muzzle thread – this is now available as special order – please contact us

It is available with or without the front mount.
If you have an M4 you do not need the front mount
If you have a MK1 or MK2 you will need the front mount.
If you have an M3 with the clamp type mount you do not need a front mount – but if you have an earlier M3 you will need the front mount.

If putting on a UK standard rifle you will lose the distance of the shroud, if you have a compact that is not a problem but on full length this may cause your silencer to hit the bottle!